...
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Enabled for the Fuel, Greyed out for the Raw Material | |
DDV (The same for the Raw material and the Fuel) | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with or without given value | Total GHG can be zero. At least one of drop-down values should be with the DDV value. |
DDV_AV (The same for the Raw material and the Fuel) | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Greyed out with given value | At least one of drop-down values should be with the DDV or AV value. |
AV (The same for the Raw material and the Fuel) | Enabled | Enabled. The value could be negative. The land use field should be provided if EL value is provided. | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | |
NUTS2 | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out with EEC Value | Total GHG always greater than 0 |
DDV_NUTS2 | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with given value | Total GHG always greater than 0 At least one DDV method type is required |
...
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total | Comments | |||||
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | All fields to be greyed out.
| |||||
DDV | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with or without given value | Message below GHG Emissions as “At least one DDV method type is required”
Total GHG can be zero. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV | |||||
DDV_AV | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Greyed out with given value | Message below GHG Emissions as “At least one DDV and one AV method type is required”
At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV Do not allow to type (-)except EL | |||||
AV | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | Message below the total GHG field: “At least one E field is required” Do not allow to type (-)except EL | |||||
...
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | total GHG is greyed out (null) |
DDV | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out withgiven value | Message below GHG Emissions as “At least one DDV method type is required”
Total GHG can be zero. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV |
DDV_AV | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Greyed out with given value | Message below GHG Emissions as “At least one DDV and one AV method type is required”
At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV |
AV | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | Message below the total GHG field: ” At least one E field is required”.
It is possible to save without entering any value. To adjust. |
NUTS2 | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out with EEC Value | total GHG always greater than 0 |
DDV_NUTS2 | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with given value | Message below GHG Emissions as “At least one DDVmethod type is required”
total GHG always greater than 0 To add drop down lists. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV – to implement |
...
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | We don’t display any total Ghg value. In future the Pos is going to disappear from the UI, we will keep it only for the traceability reason. |
DDV | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with or without given value | Message below GHG Emissions as “At least one DDV method type is required”
Total GHG can be zero. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV |
DDV_AV | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Greyed out with given value | Message below GHG Emissions as “At least one DDV and one AV method type is required”
At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV |
AV | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | Message below the total GHG field: ” At least one E field is required”.
It is possible to save without entering any value. To adjust. |
...
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Enabled | Not modifiable |
DDV to copy existing values from the input material | Enabled: either DDV or DDV and given value Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value Enabled (Not Mandatory) | Greyed out | Greyed out | Greyed out | Greyed out with given value | Able to Complete the POS without giving any values.
At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV. Total GHG can be zero. |
DDV_AV to copy existing values from the input material | Enabled: either DDV or DDV and given value or AV and given value Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value or AV and given value
Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value or AV and given value Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value or AV and given value Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value or AV and given value Enabled (Not Mandatory) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) Enabled (Not Mandatory) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) Enabled (Not Mandatory) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) Enabled (Not Mandatory) | Greyed out with given value | Able to Complete the POS without giving any values.
At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV. To apply a check: “Total GHG should be greater than 0” |
AV to copy existing values from the input material | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | Able to Complete the POS without giving any values.
To apply a check: “Total GHG should be greater than 0” |
DDV_NUTS2 to copy existing values from the input material | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed | Greyed | Greyed | Greyed out with given value | Able to Complete the POS without giving any values.
total GHG always greater than 0 To add drop down lists. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV – to implement |
...
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Enabled | Complete the POS by entering any number in Total Total GHG field is mandatory
Not modifiable |
DDV to copy existing values from the input material | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out | Greyed out | Greyed out | Greyed out with or without given value | Able to Complete the POS without giving any values.
At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV. Total GHG can be zero. |
DDV_AV to copy existing values from the input material | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled | Enabled | Enabled | Greyed out with given value | Able to Complete the POS without giving any values.
At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV. To apply a check: “Total GHG should be greater than 0” |
AV to copy existing values from the input material | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value |
Able to Complete the POS without giving any values.
To apply a check: “Total GHG should be greater than 0” |
DDV_NUTS2 to copy existing values from the input material | Enabled: either DDV or NUTS2 and given value or NUTS2 and given value | Enabled | Enabled | Enabled | Enabled | Greyed | Greyed | Greyed | Greyed out with given value | Able to Complete the POS without giving any values.
total GHG always greater than 0 To add drop down lists. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV – to implement |
...