...
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Enabled for the Fuel, Greyed out for the Raw Material | Total fuel GHG should be greater than 0. |
DDV (The same for the Raw material and the Fuel) | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with or without given value | Total GHG can be zeronull. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV |
DDV_AV (The same for the Raw material and the Fuel) | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Greyed out with given value | At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV |
AV (The same for the Raw material and the Fuel) | Enabled | Enabled. The value could be negative. The land use field should be provided if EL value is provided. | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | At least one E field value is required. |
NUTS2 | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out with EEC Value | Total GHG always greater than 0 |
DDV_NUTS2 | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with given value | Total GHG always greater than 0 At least one DDV method type is requiredof drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV. |
PART B POINT OF ORIGIN BUYER TRADE - RAW MATERIALS
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total | Comments | |||||
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out |
Total GHG is greyed out and null. |
DDV | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with or without given value |
Total GHG can be |
null. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV | |||||||||||||||
DDV_AV | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Greyed out with given value | At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV | |||||
AV | Enabled | Enabled. The value could be negative. The land use field should be provided if EL value is provided. | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | At least one E field is required. |
PART A AND FOOD & FEED CROPS POINT OF ORIGIN BUYER TRADETRADE - RAW MATERIALS
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Total GHG is greyed out (null) |
DDV | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with given value | Total GHG can be zeronull. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV |
DDV_AV | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Greyed out with given value | At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV |
AV | Enabled | Enabled. The value could be negative. The land use field should be provided if EL value is provided. | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | At least one E field is required.
|
NUTS2 | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out with EEC Value | Total GHG always greater than 0 |
DDV_NUTS2 | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Enabled: either DDV or DDV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with given value | Total GHG always greater than 0 At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV. |
...
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | We don’t display any total Ghg value. In future the Pos is going to disappear from the UI, we will keep it only for the traceability reasonfuel GHG value at the POS screen for the moment. |
DDV | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed out | Greyed out with or without given value | Message below GHG Emissions as “At least one DDV method type is required”
Total GHG can be zeronull. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV |
DDV_AV | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Greyed out with given value | Message below GHG Emissions as “At least one DDV and one AV method type is required”
At least one of dropAt least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV |
AV | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | Message below the total GHG field: ” At least one E field value is required”required. It is possible to save without entering any value. To adjust. |
CONVERSION (Material processing)
...
Raw material-to-Raw material: (not yet implemented)
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments | ||||||
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | EnabledGreyed out | Not modifiable | ||||||
DDV to copy existing values from the input material | Enabled: either DDV or DDV and given valueEnabled (Not Mandatory) | Enabled: either DDV or DDV and given valueEnabled (Not Mandatory) | Enabled: either DDV or DDV and given value | Enabled (Not Mandatory)Enabled: : either DDV or DDV and given value | Enabled (Not Mandatory)Enabled: either DDV or DDV and given value Enabled (Not Mandatory) | Greyed out | Greyed out | Greyed out | Greyed out with given value | Able to Complete the POS without giving any valuesTotal GHG can be null.
At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV.Total GHG can be zero. | ||||||
DDV_AV to copy existing values from the input material | Enabled: either DDV or DDV and given value or AV and given valueEnabled (Not Mandatory) | Enabled: either DDV or DDV and given value or AV and given value
Enabled (Not Mandatory) | Enabled: either DDV or DDV and given value or AV and given valueEnabled (Not Mandatory) | Enabled: either DDV or DDV and given value or AV and given value | Enabled (Not Mandatory)Enabled: either : either DDV or DDV and given value or AV and given value | Enabled (Not Mandatory)Enabled: given value will be considered as AV value (reductions for DDV not allowed by default) | Enabled (Not Mandatory)Enabled: given value will be considered as AV value (reductions for DDV not allowed by default)Enabled (Not Mandatory) | Enabled: given value will be considered as AV value (reductions for DDV not allowed by default)Enabled (Not Mandatory) | Greyed out with given value | Able to Complete the POS without giving any values.
At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV.To apply a check: “Total GHG should be greater than 0” | ||||||
AV to copy existing values from the input material | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value | Able to Complete the POS without giving any values.
To apply a check: “Total GHG should be greater than 0” | At least one E field is required. | |||||
DDV_NUTS2 to copy existing values from the input material | Only Emissions EEC field value fetching from NUTS2_DEFINITION Table | Enabled: either DDV or DDV and given value. The value could be negative. The land use field should be provided if EL value is provided. | Enabled: either DDV or DDV and given value | Enabled | Enabled | Enabled | Enabled | Greyed | Greyed | : either DDV or DDV and given value | Enabled: either DDV or DDV and given value | Greyed out | Greyed out | Greyed outGreyed | Greyed out with given value | Able to Complete the POS without giving any values.
total Total GHG always greater than 0To add drop down lists. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV – to implement. |
Raw material-to-Fuel:
Method Type | EEC | EL | EP | ETD | EU | ESCA | ECCS | ECCR | Total |
Comments |
TDV | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Greyed out | Enabled | Complete the POS by entering any number in Total Total GHG field is mandatory
Not modifiable |
DDV (to copy existing values from the input material) | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out | Greyed out | Greyed out | Greyed out with or without given value | Able to Complete the POS without giving any values.
At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV. Total GHG can be zero. |
DDV_AV (to copy existing values from the input material) | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled: either DDV or DDV and given value or AV and given value | Enabled | Enabled | Enabled | Greyed out with given value | Able to Complete the POS without giving any values.
At least one of drop-down values should be with the DDV or AV value. Not to accept values provided without choosing the drop-down DDV or AV. To apply a check: “Total GHG should be greater than 0” |
AV to copy existing values from the input material | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Enabled | Greyed out with given value |
Able to Complete the POS without giving any values.
To apply a check: “Total GHG should be greater than 0” |
DDV_NUTS2 to copy existing values from the input material | Enabled: either DDV or NUTS2 and given value or NUTS2 and given value | Enabled | Enabled | Enabled | Enabled | Greyed | Greyed | Greyed | Greyed out with given value | Able to Complete the POS without giving any values.
total GHG always greater than 0 To add drop down lists. At least one of drop-down values should be with the DDV value. Not to accept values provided without choosing the drop-down DDV – to implement |
...